Easy Roof Shingle Repair Tips

Shingled roofs can be aesthetically stunning and they can have a number of other benefits, too. For instance, shingles can help make your home more waterproof by allowing rainwater and moisture to run off more efficiently. Plus, shingled roofs can be incredibly durable. However, if your home has been through a major storm or if you have large trees that brush against your property, you may have broken or damaged shingles. When it comes down to it, you’ll want to fix roof shingles sooner rather than later, because it could become a major problem down the line. For one thing, broken or missing shingles can be a recipe for a leak. Here are some easy roof shingle repair tips.

  1. Gather all the materials you need and head to the roof. Before you head to your roof, you want to make sure that you have all the materials you need. The last thing you want is to head up there and then realize you forgot something. Ideally, you will need heavy gloves, a hammer, a crowbar, and your new shingles.
  2. Make sure that you have a sturdy ladder. Also, you will need to find a sturdy ladder so that you can safely get to your roof. You can either rent a ladder or purchase a ladder from a home supply shop. Ideally, you want to find a ladder that has rubberized stoppers on the feet and other safety features. The last thing you want is to fall when you are climbing to your roof with a bunch of potentially dangerous tools.
  3. Use the crowbar to pry off the old or broken shingles. When you are on your roof, you want to be sure to remove the old and rotting shingles. You can do this by using the crowbar to pry the broken shingles out of place. In most cases, these shingles will be held down by long roofing nails, so it will take a little patience and elbow grease to get the nails completely out. When you are prying shingles out, you want to be sure that you don’t damage other shingles that may be in perfect condition.
  4. Slide the new shingle into place and nail it shut. Once you get the broken shingle out, you can then slide the new shingle in. You can do this by carefully sliding the shingle into place – it should slide in nicely. Once the shingle is in, you can then nail it into place. Ideally, you want to use thick roofing nails, because these will allow the shingle to stay in place for much longer – smaller nails may come out of place in only a few months.
  5. Place a new sealant strip behind the new shingles. Once you have the new shingles in, you can then place a sealant strip behind the new shingle. When it comes down to it, weatherproofing is very important, because it will prevent leaks and flooding. It may even be smart to hire a company like Heritage Roofing & Waterproofing Inc. to fully seal your roof. In the end, the cost of fixing a water damaged roof and home will be far greater than fixing shingles and sealing your roof.

Related posts:

  1. Top 4 Roofing Problems and the Prevention
  2. Better House with Better Roof
  3. 8 Reasons Why You Must Rely on the Best Roof Replacement Phoenix Service
  4. 5 Steps How to Find Heavy Duty Aluminum Ladders
  5. 5 Helpful Excavation Tips for New Home Construction
Both comments and pings are currently closed.

Comments are closed.